1、COG 7cm to 8cm from wing break.F-16C FALCON - EASYBUILD - V1.02Designed by Nick CaraDepron = 6mmWing span = 71cm (28”)Length = 104cm (41”) SETUP :-Weight (painted) = 356g Weight (painted and with battery) = 486gStatic thrust = 650gProp = 6x4Motor = 2000kvESC = 25A minimum Battery = 1350mAh 3s1p 25C
2、Li-Po (Can take up to 2170mAh)Radio = 3CH (or 4CH with optional rudder)Aileron throw = +/- 20 degreesElevon throw = +/- 25 degreesExpo = 45%NOTES:-Bevel or curve all leading edges.Trim and sand intake to a curve.Use Hot Glue for all parts except carbon rod.Protect lower edge of intake and lower f_in
3、s with packing tape.Connect both Ailerons and Elevons to a single pair of servos.Paint use colours that will stand out in the sky, dont leave it white.Control pointControl pointMax prop size 6”3mm or 4mm Carbon rod epoxy into V slot4120 3INCH41 20 3CM5 6 7 8 9 10Control pointControl pointRight Elevo
4、nLeft ElevonRight AileronLeft AileronMissile (attach to wing tip)Missile (attach to wing tip)Control points (Make 4 from old plastic credit card)Cut here for rudder (Optional)Cut here for rudder (Optional)Lower Rear FuseLower Front FuseUpper FuseTailRudder (Optional)Rudder Servo (Optional)Control po
5、intCut here for rudder (Optional)Sides (Make 2)3mm PLYWOODMOTOR MOUNT PARTSGlue Plywood onto DepronHatch to acces electronics and batteryIntake leading edge (Depron or Balsa)Doublers used in cornersDoublers (For Intake)DoublersDoublers (For Intake)Doublers (For Intake)Doublers (For Intake)DoublersDoublersBattery position
