1、QUESTION 402Network topology exhibit:Interface VLAN 101 exhibit:Interface VLAN 102 exhibit:Interface VLAN 104 exhibit:Interface VLAN 105 exhibit:You work as a network technician at TestK. You study the network topology and the other exhibits carefully.Consider the distribution switches TestKing1 and
2、 TestKing2. TestKing1 is the primary device for Vlan 101, 102, 105. TestKing2 is the primary device for Vlan 103 and 104During routine maintenance, it became necessary to shutdown G1/0/1 on TestKing1. All other interface were up.During this time, TestKing1 remained the active device for Vlan 102s HS
3、RP group. You have determined that there is an issue with the decrement value in the track command in Vlan 102s HSRP group.What need to be done to make the group function properly ?A. The TestKing1s decrement value should be configured with a value from 5 to 15B. The TestKing1s decrement value shoul
4、d be configured with a value from 9 to 15C. The TestKing1s decrement value should be configured with a value from 11 to 18D. The TestKing1s decrement value should be configured with a value from 195 to less than 205E. The TestKing1s decrement value should be configured with a value from 200 to less
5、than 205F. The TestKing1s decrement value should be greater than 190 and less 200Answer: CSection: Mixed Practice Questions 4QUESTION 403Network topology exhibit:Interface VLAN 101 exhibit:Interface VLAN 102 exhibit:Interface VLAN 104 exhibit:Interface VLAN 105 exhibit:You work as a network technici
6、an at TestK. You study the network topology and the other exhibits carefully.Consider the distribution switches TestKing1 and TestKing2. TestKing1 is the primary device for Vlan 101, 102, 105. TestKing2 is the primary device for Vlan 103 and 104 Note: Please refer to the TestKing#2 scenario.During r
7、outine maintenance, G1/0/1 on TestKing1 was shutdown. All other interface were up.TestKing2 became the active HSRP device for Vlan101 as desired. However, after G1/0/1 on TestKing1 was reactivated.TestKing1 did not become the active HSRP device as desired. What need to be done to make the group for
8、Vlan101 function properly ?A. Enable preempt on TestKing1s Vlan101 HSRP groupB. Disable preempt on TestKing1s Vlan101 HSRP groupC. Decrease TestKing1s priority value for Vlan101 HSRP group to a value that is less than priority value configured on TestKing2s HSRP group for Vlan101D. Decrease the decr
9、ement in the track command for TestKing1s Vlan 101 HSRP group to a value less than the value in the track command for TestKing2s Vlan 101 HSRP group.Answer: ASection: Mixed Practice Questions 4QUESTION 404Network topology exhibit:Interface VLAN 101 exhibit:Interface VLAN 102 exhibit:Interface VLAN 1
10、04 exhibit:Interface VLAN 105 exhibit:You work as a network technician at TestK. You study the network topology and the other exhibits carefully.Consider the distribution switches TestKing1 and TestKing2. TestKing1 is the primary device for Vlan 101, 102, 105. TestKing2 is the primary device for Vla
11、n 103 and 104Note: Please refer to the TestKing#2 scenario.TestKing2 has not become the active device for Vlan103s HSRP group even though all interfaces are active. As related to Vlan103s HSRP group. What can be done to make the group function properly ?A. On TestKing1, disable preemptB. On TestKing
12、1, decrease the priority value to a value less than 190 and greater than 150C. On TestKing2, increase the priority value to a value greater 241 and less than 249D. On TestKing2, increase the decrement value in the track command to a value greater than 10 and less than 50.Answer: CSection: Mixed Prac
13、tice Questions 4QUESTION 405Network topology exhibit:Interface VLAN 101 exhibit:Interface VLAN 102 exhibit:Interface VLAN 104 exhibit:Interface VLAN 105 exhibit:You work as a network technician at TestK. You study the network topology and the other exhibits carefully.Consider the distribution switch
14、es TestKing1 and TestKing2. TestKing1 is the primary device for Vlan 101, 102, 105. TestKing2 is the primary device for Vlan 103 and 104Note: Please refer to the TestKing#2 scenario.If G1/0/1 on TestKing1 is shutdown, what will be the current priority value of the Vlan105s group on TestKing1 ?A.95 B
15、.100 C.150 D.200Answer: ASection: Mixed Practice Questions 4Explanation/Reference:Explanation:Priority is configured 150, Track is 55. So, if shutdown interface G1/0/1 - 150 - 55 = 95.QUESTION 406Network topology exhibit:Interface VLAN 101 exhibit:Interface VLAN 102 exhibit:Interface VLAN 104 exhibi
16、t:Interface VLAN 105 exhibit:You work as a network technician at TestK. You study the network topology and the other exhibits carefully.Consider the distribution switches TestKing1 and TestKing2. TestKing1 is the primary device for Vlan 101, 102, 105. TestKing2 is the primary device for Vlan 103 and
17、 104 Note: Please refer to the TestKing#2 scenario.What is the configured priority value of the Vlan105s group on TestKing2 ?A.50 B.100 C.150 D.200Answer: BSection: Mixed Practice Questions 4Explanation/Reference:Explanation:Use “show stantby brieft“ command on console2 . Very easy to see priority o
18、f Vlan105 is 100.QUESTION 407Network topology exhibit:Interface VLAN 101 exhibit:Interface VLAN 102 exhibit:Interface VLAN 104 exhibit:Interface VLAN 105 exhibit:You work as a network technician at TestK. You study the network topology and the other exhibits carefully.Consider the distribution switc
19、hes TestKing1 and TestKing2. TestKing1 is the primary device for Vlan 101, 102, 105. TestKing2 is the primary device for Vlan 103 and 104Note: Please refer to the TestKing#2 scenario.During routine maintenance, it became necessary to shutdown G1/0/1 on TestKing1 and TestKing2.All other interface wer
20、e up. During this time, TestKing1 became the active device for Vlan104s HSRP group.As related to Vlan104s HSRP group. What can be done to make the group function properly ?A. On TestKing1, disable preemptB. On TestKing2, decrease the priority value to a value less than 150C. On TestKing1, increase t
21、he decrement value in the track command to a value greater than 6D. On TestKing1, disable track command.Answer: CSection: Mixed Practice Questions 4Explanation/Reference:Explanation:We should NOT disable preempt on TestKing1. By do that, you will make Vlan104s HSRP group fail function. Example: if w
22、e are disable preempt on TestKing1. It can not become active device when G1/0/1 on TestKing2 fail. In this question, G0/1/0 on TestKing1 TestKing2 is shutdown. Vlan104 (left) : 150 - 1 = 149. Vlan104 (right) : 200 - 155 = 145. Result is priority 149 145 ( Vlan104 on TestKing1 is active). If increase
23、 the decrement in the track value to a value greater than 6 ( or = 6). Vlan104 (left) : 150 - 6 = 144. Result is priority 144 145 ( vlan104 on TestKing2 is active).QUESTION 408Network topology exhibit:Interface VLAN 101 exhibit:Interface VLAN 102 exhibit:Interface VLAN 104 exhibit:Interface VLAN 105
24、 exhibit:You work as a network technician at TestK. You study the network topology and the other exhibits carefully.Consider the distribution switches TestKing1 and TestKing2. TestKing1 is the primary device for Vlan 101, 102, 105. TestKing2 is the primary device for Vlan 103 and 104 Note: Please refer to the TestKing#2 scenario.Which statement is correct about the use of the virtual interface on a WLC :A. Used to relay DHCP messagesB. Used to communicate with LAPsC. Used to bring up LWAPP tunnelsD. Used to extend into the wireless client VLANAnswer: ASection: Mixed Practice Questions 4
