1、PCD5/PDR14048.2-2008/MCCB/1申请 CCC 强制认证产品描述(低压电器类)Product Description For China Compulsory Certification(Low-voltage Products)申请编号(Application No.) A2009CCC0307-740740申请人(Applicant) 杭州圣力电气有限公司地址(Address of Applicant) 杭州市丁石路 67号工厂编号(Factory Code) A015883生产厂(Factory) 杭州圣力电气有限公司地址(Address of Factory) 杭州
2、市丁石路 67号产品名称(Name of Product)塑料外壳式断路器(MCCB)型号(Model/Type) ZNM1-100H Ui:800V,50Hz,Ue:AC400V Ics:35KA,Icu:50KA,In:16、20、25、32、40、50、63、80、100A申请单位( 印章 )Applicants seal here工厂编号 Factory Code:第 1 页 共 10 页企业自我声明 1(Applicant Declaration 1)本企业在此郑重声明:本次申请中，我单位向指定检测机构提供的型号/ 规格为 的塑料外壳式断路器 ZNM1-100H (产品名称) 是由
3、杭州圣力电气有限公司 (生产 厂名称) 于杭州市丁石路 67 号( 生产厂地址)完成最终装配和出厂检验。本企业对提以上情况的真实性负责，否则由此引起任何事情由本企业将承担全部责任。Herein we solemnly declare that the final assemble and routine tests of MCCB (product name) under ZNM1-100H (model type and specification) within this application are done by HANGZHOU SHENGLI ELECTRIC CO., LTD
4、(factory name) located at NO.67 DINGSHI ROAD, JIANGGAN DISTRICT, HANGZHOU, ZHEJIANG (factory address). We guarantee the authenticity of the above declaration; otherwise we are willing to assume any possible consequences.申证企业负责人(签名):Applicants representative (signature)日期(Date):2009-6-27(企业 盖章)(Appli
5、cants seal here)工厂编号 Factory Code:第 2 页 共 10 页企业自我声明 2(Applicant Declaration 2)企业名称(Applicant): 杭州圣力 电气有限公司申证产品名称、型号规格(Product Name and Model/Type): ZNM1-100H 塑料外壳式断路器注册商标(Trade Mark): HZSHLI本企业在此郑重声明:上述申证产品所使用的型号和商标保证严格遵守国家有关法律法规和政府部门的有关规定。如有乱用、冒用其他企业产品的型号和商标导致侵权行为，本企业 将对其后果承担全部法律责任。本企业对提供所有与认证有关资料
6、的真实性负责。如果本企业获证的产品有所变更，将及时 提交产品变更报告，否则由此引起任何事情由本企业将承担全部责任。Herein we solemnly declare: all the above-mentioned model types and trademarks are in strict compliance with relevant national laws, stipulations and governmental regulations. We are clear that any abuse or misuse of other manufacturers model
7、types and trademarks will be treated as an infringement act and in case of such an act, we will assume all legal responsibilities. We guarantee the authenticity of all the documentation we submit for CCC approval. In case of any changes to the certified product, we will timely keep CQC informed by s
8、ubmitting product change report; otherwise we will assume all legal responsibilities.申证企业负责人(签名):Applicants representative (signature)日期(Date):2009-6-27(企业 盖章)(Applicants seal here)工厂编号 Factory Code:第 3 页 共 10 页产品描述(Product Description)1.产品构成的描述及结构特点（结构概要说明）：Products composition and construction cha
9、racteristics (brief description of the construction):包括产品的主要组成部件,操作方式 ,安装方式,接线方式等，还包括以下内容：本断路器主要由底壳、外盖、进出线静触头以及与操作机构连接在一起的动触头组成、产品通过出线端热磁式脱扣器进行过载、短路分断作用；操作方式有手动操作和 电动操作两种；安装方式有垂直安装和水平安装两种，接线方式为板前接线 。Including main parts of the product, means of operation, installation and wiring, and etc., and also
10、the following information:1）产品型号及名称(Product Model type and Name)：ZNM1-100H 塑料外壳式断路器 保护功能(过载、短路、欠压、断相、接地故障及零序电流保护等)(Protective Function (Overload, Short-circuit, Undervoltage, Phase-losing, Ground fault, Residual current, and etc.): 过载、短路断路器附件(辅助、报警、欠压、分励、电动操作机构和旋转操作手柄等)(Circuit-breaker Accessories (
11、Auxiliary, Alarm, Undervoltage, Shunt, Electric Operator, Rotary operating handle, and etc.): / 带电子电路的附件(欠压、分励、电动操作机构、 远程状态指示器 )(Accessories with electronic circuits(Undervoltage, Shunt, Electric Operator, Remote Status Indicator): 2）提供图纸及编号(Drawings offered and their serial numbers):总装配图(General as
12、sembly drawing): 3SL.205.014.1-9; 电气原理图(Electrical Schematic diagram):(包括元件明细表 Including the components list)(适用于电子式和智能化过电流脱扣器 Applicable for Electronic/ Intelligent over-current release)/ 3） 主要结构数据(Main constructional parameter):(1). 触头系统(Contact System)触头参数(Contact parameter):开距(Contact gap) 17 mm
13、 终压力(terminal pressure) 6.8N 超程(Over travel) 2.0mm 触头尺寸(Contact Dimension):静触头(Fixed contact) 662 动触头(Moving contact) 46.72 (2). 过电流脱扣器(Over-current Release)过电流脱扣器型式(热 磁式、液压电磁式、电子式或智能化脱扣器等)(Over-current Release Type(Thermal Magnetic/Hydraulic Pressure Electro-magnetic/Electronic/ Intelligent, and et
14、c.)热磁式 热双金属片式:热双金属材料型号及 规格(Thermostatic Bimetal Type: Material, Model/Specification) 5j1580,5j20110 加热元件材料型号及规格(Heating Element: Material, Model/Specification) 5j20110;Cr15Ni60; 1Cr13Al4;QSn6.5-0.1Y2 电子式和智能化过电流脱扣器:执行机构磁轭铁心材料名称及牌号(Electronic/ Intelligent over-current release: Magnetic Yoke Core of Ac
15、tuator: Material Name/Serial number)/ 永久磁钢材料名称及牌号(Permanent Magnetic Steel: Material Name/Serial number) / (3). 机构(Mechanism)跳扣、锁扣和再扣零件为金属零件 时(When the Latched device, tripping device and re-tripping device are metal parts):镀层材料及厚度(Coating Material and its Thickness) 冷轧钢板 45# 、10# 硬度(Hardness) 跳扣、锁
16、扣 HRC38-47; 再扣 HRC26-37 工厂编号 Factory Code:第 4 页 共 10 页产品描述(Product Description)2. 主要技术参数(Main technical Parameter):(如不适用项 用 “/” 表示 if not applicable, filled with “/ ”)分类(Classification):1） 使用类别(A 或 B)(Utilization Category: A or B): A 类 2） 是否具有隔离功能(S uitability for insulation): 有 3） 安装方式(固定式、插入式、抽屉式)
17、(Method of installation: Fixed, Plug-in, Withdrawable): 固定式 特性(Characteristic):1) 极数(N umber of poles): 3P、4P 2) 电流种类(AC 或 DC) (Kind of current: AC or DC): AC 3) 主电路额定值(Rated Value of Main Circuit):额定工作电压(Rated operational voltage Ue)(V): AC 400V 额定绝缘电压(Rated insulation voltage Ui)(V): AC 800V 额定冲击耐
18、受电压(Rated impulse withstand voltage Uimp)(kV): 8 kV 额定电流(Rated current Ie)(A): 16、20、25、32、40、50、63、80、100 四极断路器的电流额定值(Current rating for four-pole circuit-breakers)(A):相极(Phase pole) 16、20、25、32、40、50、63、80、100 中性极(Neutral pole) 16、20、25、32、40、50、63、80、100 额定频率(Rated Frequency)(Hz): 50 额定运行短路分断能力 I
19、cs(kA): 35kA 额定极限短路分断能力 Icu(kA): 50kA 额定短时耐受电流 Icw(kA/s): / 4) 控制电路(Control Circuits)电动操作机构(Electric Operator)额定绝缘电压(Rated insulation voltage Ui)(V): / 额定冲击耐受电压(Rated impulse withstand voltage Uimp)(kV): / 额定控制电源电压(Rated control supply voltage Us)(V): / 电流种类(AC 或 DC) (Kind of current: AC or DC): / 额
20、定频率(Rated Frequency) (Hz): / 5) 辅助电路(Auxiliary Circuits)种类和对数(Kind of contact elements and number of auxiliary circuits): / 约定发热电流(Conventional free air thermal current Ith)(A): / 额定绝缘电压(Rated insulation voltage Ui)(V): / 额定冲击耐受电压(Rated impulse withstand voltage Uimp)(kV): / 额定限制短路电流配合 SCPD 型号(Type
21、of SCPD for Rated Conditional Short-circuit Current):/ 相应使用类别下额定工作电流和工作电压(Rated operational current and voltage of corresponding Utilization Category): / 工厂编号 Factory Code:第 5 页 共 10 页产品描述(Product Description)6) 脱扣器(Releases)分励脱扣器(Shunt release)额定绝缘电压(Rated insulation voltage Ui)(V): / 额定冲击耐受电压(Rate
22、d impulse withstand voltage Uimp)(kV): / 额定控制电源电压(Rated control supply voltage Us) (V): / 电流种类(AC 或 DC) (Kind of current: AC or DC): / 额定频率(Rated Frequency)(Hz): / 欠压脱扣器(Undervoltage release)额定绝缘电压(Rated insulation voltage Ui)(V): / 额定冲击耐受电压(Rated impulse withstand voltage Uimp)(kV): / 额定控制电源电压(Rate
23、d control supply voltage Us) (V): / 电流种类(AC 或 DC) (Kind of current: AC or DC): / 额定频率(Rated Frequency)(Hz): / 过电流脱扣器(Over-current release)电流设定及精度(Current Setting and Accuracy): 瞬时：10 In20% ，过载：1.05 In，1.3 In15% 带保护中性极的电流设定及精度(Current Setting and Accuracy of Protected Neutral Pole): 时间设定及精度(Time Sett
24、ing and Accuracy): 基准温度(Reference Temperature): 402 脱扣级别(同时符合GB14048.2 和GB14048.4 带电动机保护的断路器)( Trip Class for motor protective circuit-breaker which complies with both GB14048.2 and GB14048.4) / 7） 电磁兼容 EMC(环境 A 或 B)(EMC Environment: A or B) / 8） 是否用于 IT 系统(Applicable for IT system): 不适用 (如不适用铭牌上应标上
25、 ,If not, it should be marked with )9） 带保护中性极的结构与相极的结构是否不同(Whether the construction of the protected neutral pole differs from that of the phase poles): / 10） 是否用于相接地系统(Applicable for phase-earthed system): 否 11） 是否内部安装熔断器(Integral fuses): 否 12） 是否有进出线标记(Terminals marked with line/load): 有 13） 飞弧距离(
26、Flashover distance):上下(Up/Below)(mm): 50 左右(Left/Right)(mm): 50 前后(Front/Back)(mm): 50 工厂编号 Factory Code:第 6 页 共 10 页产品描述(Product Description)3. 系列的描述和型号的解释(Description of product series and explanation of model/ type):3.1 本申请单元产品(Among the model types within this application):1) 除下面a)、b)和c)中的差异，内部
27、载流部件的材料， 镀层和尺寸是否相同(Except for the difference showed in a), b) and c) below, whether different model types within this application are using the internal current-carrying parts of the same material, finish and dimensions):是Y否N 2) 主触头的尺寸、材料、结构和连接方法是否相同(Whether different model types within this applica
28、tion are using the main contacts of the same size, material, configuration and method of attachment): 是Y 否N 3) 任何内配手操机构，其材料和物理特性是否相同(Whether different model types within this application are using any internal manual operating mechanism of the same material and physical characteristics): 是Y 否N 4) 模压
29、和绝缘材料是否相同(Whether different model types within this application are using the same molding material and isolating materials): 是Y 否N 5) 熄灭电弧装置的工作原理、材料和 结构是否相同(Whether different model types within this application are using the arc extinction device of the same operation principle, materials and const
30、ruction): 是Y 否N 6) 除下面a)、b)和c)中的差异， 过电流脱扣装置的基本结构是否相同(Except for the difference showed in a), b) and c) below), whether different model types within this application are using the over-current tripping devices of the same basic design): 是Y 否N 注(Remark): a) 接线端尺寸，只要电气间隙和爬电距离不减少(Difference in terminals
31、 dimensions is acceptable, provided clearance and creepage distance are not reduced);b) 对于热磁脱扣器，其确定电流额定值的脱扣元件的尺寸和材料(For thermal and magnetic releases, difference in dimensions and materials of the release components, including flexible connections which determine the current rating is acceptable);c)
32、 供脱扣器运行的电流互感器的二次线圈(Difference in the secondary windings of current transformer operated releases is acceptable).3.2系列的描述(本申请单元不同型号、不同 电流等级的异同 说明)(Series description(Description for different type and different current):ZNM1-100H型断路器的额定绝缘电压为800V，具有 过载、短路等保护功能。适用于交流50Hz，额定工作电压400V，额定工作电流从16至100A 的配电网络
33、中。 额定电流In：16、20、25、 32、40、50、63、80、100A。极数：3P、4P。分断能力 Ics：35kA；Icu：50kA。过载：In 63A，1.05In1h不脱扣，1.30In1h脱扣；In63A，1.05In 2h，1.30In 2h脱扣。 3.3 型号的解释(Explanation of model/ type):ZN M 1 - 100 / 4 300 脱扣方式（复式脱扣器）级数， 3 表示 3 级、 4 表示 4 级分断能力级别：H 较高型壳架等级额定电流设计序号塑料外壳式断路器企业代号 工厂编号 Factory Code:第 7 页 共 10 页产品描述(Pr
34、oduct Description)4. 特殊结构说明(如有需要):Description of special structure (if necessary):工厂编号 Factory Code:第 8 页 共 10 页产品描述(Product Description)5.产品认证情况(Situation of certification):6. 安全件一览表(Safety components/parts list):序号Item No.元/部件名称Name of components/parts元件 /材料名称Description of Parts/Material型号规格/牌号Ty
35、pe/ModelSerial number供应商（生产厂）Supplier(Factory)外壳(机座, 盖,)Enclosure(base, cover,)不饱和聚酯玻璃纤维增强模塑料；DMC1手柄 handle 增强阻燃尼龙 PA66乐清市炜泰配件电器厂，浙江大华开关厂，乐清市君乐电器厂乐清市伯特利树脂制品有限公司2 转轴 Revolving shaft不饱和聚酯玻璃纤维增强模塑料 DMC；乐清市炜泰配件电器厂浙江大华开关厂乐清市君乐电器厂乐清市伯特利树脂制品有限公司3锁扣, 跳扣, 再扣Latched device, tripping device, and re-tripping de
36、vice冷轧钢板 45#、10#；乐清市炜泰配件电器厂，浙江大华开关厂，乐清市君乐电器厂乐清市伯特利树脂制品有限公司动 银钨合金 AgW50，4动静主触头Fixed contact and moving contact (for main contact)静银钨合金 AgWC(12)C(3) 上海人民电器股份有限公司人民电器厂电器触头分厂浙江天银技术合金公司上海科学电器研究所合金分所浙江福达合金材料股份有限公司5主触头弹簧Spring for main contact 碳素弹簧钢丝： T9A、70-C；宁波东吴兴达弹簧厂乐清奇力电器五金配件厂乐清正达弹簧有限公司浙江大华开关厂6热磁式脱扣单元T
37、hermal type release 双金属元件； 5j1580,5j20110宁波鄞县恒生精密元件厂乐清市天盛双金属有限公司温州亚大双金属有限公司浙江大华开关厂7电子脱扣单元(微处理器, 电子组件板)Electronic type release(microprocessor, Electronic board)/ / /8 分励脱扣器 Shunt release / / /9欠压脱扣器Undervoltage release/ / /10外部辅件(电操机构)External parts(electric operating device)/ / /栅片 冷轧钢板 10#11 灭弧罩 Ar
38、c control device 骨架 三聚氰胺层压玻璃纤维板乐清市炜泰配件电器厂，浙江大华开关厂，乐清市君乐电器厂乐清市伯特利树脂制品有限公司工厂编号 Factory Code:第 9 页 共 10 页注 1: 安全件如涉及一个以上的制造商(生产厂) ，则填在第一位的制造商(生产厂) 为型式试验样品提供安全件的制造商(生产厂)。注 2: 本企业声明:安全件如涉及一个以上的制造商 (生产厂 )，型式试验样品所选用制造商(生产厂)提供的安全件与本企业所填写的其他制造商(生产厂) 提供的 该安全件不存在性能上的差异。Note1: for the above listed safety parts,
39、 if there are more than one supplier/factory, then the supplier/factory which provides the safety parts for samples for the type test should be put in the first place. Note 2: We declare that for the above listed safety parts, if there are more than one supplier/factory, then there should be no diff
40、erence in terms of performance between the safety part used in the samples for type tests and other safety parts provided by the other suppliers/factories above listed.申请企业负责人(Applicants representative):日期(Date):2009-6-27申请单位(盖章)(Applicant seal here)工厂编号 Factory Code:第 10 页 共 10 页产品描述(Product Description)7.产品外形照片(包括外形、内部结构及铭牌三类照片):Product pictures (incl. Appearance/inner construction and name plate):
