1、three/74SoftwareI-CalI-cal is a new software application designed for automatic temperature calibration using Isotech products. Itis affordable, easy to use and modular.In the simplest form it can be used with a SITE Dry Block Calibrator to automatically calibrate a single sensoragainst the block te
2、mperature. To calibrate multiple sensors simply add an Isotech Selector Switch - there are two models; one for up toeight resistance thermometers and one for up to eight thermocouples. You can have a total of two boxes,any combination, to calibrate up to 16 sensors!I-cal also supports the TTI-5 and
3、TTI-6 indicators and with these you can easily build an automatic calibrationsystem to calibrate up to 16 sensors on the TTIs channel B, with a standard probe on channel A. Thecalibration results are saved to a text file that can be opened in your preferred application to create acertificate or repo
4、rt.I-cal CAPTURE is suitable for the automaticcalibration of hand-held thermometers andsimilar devices. Previously hand-helds could notbe easily calibrated automatically because mostmodels do not have provision for a connectionto a PC. I-cal CAPTURE solves this by using alow cost camera. I-cal, as u
5、sual, monitors the dryblock bath / standard for stability, it then grabsan image before setting the bath to the nexttemperature. The image is captured with thedate and time to make a complete visual record(as shown).Key Featuresa71 Use ISOTECH equipment to automaticallycalibrate temperature sensorsa
6、71 Affordable and Expandable - A Selector Switchand or True Temperature Indicator can be addedto the Dry Block at any timea71 Calibrate up to 16 sensors - Use twoswitchboxes to calibrate up to 16 sensors at up to10 temperaturesa71 Save Time - Set I-cal going, go home and returnto the calibration res
7、ults!a71 Results saved to Text File - the calibrationresults are stored to a text file for you to processa71 I-cal CAPTURE can save images - of devices likehandheld thermometers that can not beconnected to the PCA caption is added showing dates,time and the standard temperature.three/75SoftwareI-Cal
8、How to Order I-calI-cal CAPTUREa71 Desktop or Notepad PCa71 166Mhz Pentium Processor with mmx or greatera71 32Mb Ram (I-Cal Capture 64Mb Ram)a71 800 x 600 / 16 bit displayI-cal Windows 95Windows 98Windows 98MEWindows NT4.0I-cal Capture Windows 95Windows 98Windows 98MEI-cal Capture - Supported Camera
9、 Intel PC Camera Pro Pack(Recommended, check withISOTECH for othersupported models)150Mb free Hard disk spaceSerial Ports A maximum of three portsare required, one for the dryblock, one for the TTI andone for the Switchboxes(Two Switchboxes can beoperated from a single port)HintExtra serial ports can easily beadded to a PC with USB bypurchasing low cost “USB toSerial Convertors”; Includingthose from Belkin.I-cal the affordable automatic calibration systemWin 9x - ExpandableCalibrate RTDs and thermocouplesMinimum System Requirements
