1、111989MSDS North America/ANSI Z400.1-USA/ENGLISHMaterial Safety Data SheetSection 1.chemical product and company identificationProduct name ORNC GEARLUBEManufacturer ORNC Chemical Company 150West Warrenville Road Naperville.lllinois 60653-8460 USA Tel:1(877)701-2726Supplier ORNC Chemical Company 150
2、 West Warrenville Road Naperville,lllinois,60653-8460 USA Tel:1(877)701-2726EMERGENCY HEALTH 1(800)447-8735INFORMATTON:EMERGENCY SPILL 1(800)424-9300INFORMATION: CHEMTREC(USA)OTHER PRODUCT 1(866)4BP-MSDSINFORMATION (866-427-6737 Toll Free-North America) email:section2 Composition,in formation on ing
3、redientsName CAS# %by Exposure limits Weight1)Poly butene(lsobutylene/butane copolymer)9003-29-6 99 None assignedSection3,Hazards ldentificationPhysical state LjquidColer Clear.ColodessEmergency Overview This Product has been evaluated and doss not require any hazard warring on the label under estab
4、lished regulatory criteria. Use only with adequate ventilation. Wash thoroughly after handing. Avoid contact with eyes.POTENIIAL HEALTHEFFECTS Eyes May cause slight transient imitation. Heated material can cause thermal bums. Skin Repeated exposure may cause skin dryness or cracking. Heated material
5、 can cause thermal bums. Inhalation Exposure to aerosols or particulates from heated material may cause adverse lung effects in high concentrations are in hated. Ingestion ingestion may cause gastrointestinal imitation and diarrheaSee Toxicological Information (section 11)Continued on Next Page.ORNC
6、 GEARLUBESection8 Exposure ControIs,Personal ProtectionEngineering Controls Use only with adequate ventilation. Avoid breathing vapor cr mist. Wear appropriate respirator when ventilation is inadequate. Ensure. That eyewash stations and safety showers are proximal to the work-station.Personal protec
7、tion Safety glasses with side shields. Goggles,face shield, or other full-faceEyes protection if potential exists for direct exposure to aerosols or splashes,or when material is handled hot.Skin and Body wear apron or coverall if potential for to splashes. When handling hotmaterial, wear heat resist
8、ant protective gloves,clothing and face shield that are able to withstand the temperature of the molten product.Respiratory Respiratory protection is not normally required. If heated and ventilation is inadequate, use a NiOSH certitled respirator with an organic vapor cartridge and P95 particulate f
9、ilter.Hunds Gloves: Protective gloves should be worn under normal conditions of use When handling hot material, wear heat-resistant protective gloves that are able to withstand the temperature of molten product.Chemical name Exposure Limits1)Polybutene (lsobutyiene/butane copolymer) None assignedCon
10、sult local authorities for acceptable exposure limits.Section9. Physical Chemical PropertiesPhysical state LiquidpH Not applicableBoiling/Condensation point Not available.Melting/Freezing point Not available.Specific gravity 0.879(Water=1)(minimum)Vapor pressure Not available.Vapor Density Not avail
11、able.Odor Threshold Not available.Evaporation Rate Not available.LogK Not available.Solubility in soluble in cold water, hot water.Section 10.Stability and ReactivityStability and Reactivity Stable under recommended storage and handling conditions (see section 7).Depolymerzes at temperatures above 2
12、50C.Conditions to avoid Keep away from sources of ignition. Keep away from heat, sparks and flame.Incompatibinty with Strong oxidizing agents; acidic clays at100C.Various SubstancesHazardous Decomposition Products products of Combustion: carton oxides (CO,CO2).Hazardous Polymerization Will not cocur
13、.Section 11. Toxicological lnformationAcute toxicity Acute oral toxicity (LD50):34600 mg/kgRat(similar material). Acute dermal toxicity(LD50):10250 mg/kgRat (similar material). Similar materials were practically non-toxic when tested in acute cral (rat LD5034,600 mg/kg),dermal (rabbit LD5010,250 mg/
14、kg). A range of similar materials have been tested for eye and skin imitation. For eye of these materials have produced scores exceeding 3.0 out of a possible total of 110 with complete disappearance of effects in 72 hours (rabbits).Consequently these materials are not expected to be imitating to th
15、e eyes. When applied to the skin of rabbits similar materials scored 1.5 out of a possible total of 8.0,indicating that this product may be a slight.Continued on Next PageIMO/IMDG.CLASSIFICATIONORNC GEARLUBE VGUN number Bulk deliveries of material transported hot (100C):UN3257Proper shipping name Bu
16、lk deliveries of material transported hot (100C):Elevated temperature liquid, n.o s.IMDG Class Bulk deliveries of material transported hot (100C):9UN number Bulk deliveries of material transported hot (100C)UN:3257Packing Group Bulk deliveries of material transported hot (100C): llMarinE Pollutant N
17、ot Pollutant.ICAO/IATA Classification Proper shipping name Bulk deliveries of material transported hot (100C):Forbidden When this material is shipped at temperatures 154(309.2F) (Cleveland).Flash Points Not available.products of Combustion These Products are carbon oxides(CO,CO2). Unusual fire/explo
18、sion Rapid deploy merzation can occur in a fire to produce flammable vapors.Hazards Non-explosive in presence of open flames, sparks and static discharge .of shocks, of heat of heat ,of oxidizing materials Fire Fighting Media SMALL FIRE: Use DRY chemical powder.And Instructions LARGE FIRE: Use water
19、 spray ,fog or foam. Do not use water jel Cool closed containers exposed to five with water.Protective Clothing Fire fighters should wear positive pressure self-contained breathing apparatus (SCBA)and full tumout gear.Section6 Accidental Release MeasuresLarge Spill and Leak lmmediately contact emerg
20、ency personnel. Keep unnecessary personnel away. Use suitable protective equipment (Section 8).Follow all fire fighting procedures (Section 5).if emergency personnel are unavailable, contain spilled material. For small spills add absorbent (soil may be used in the absence of other suitable materials
21、)scoop up material and place in a sealed, liquid-proof container. Transfer into suitable containers for recovery or disposal., For large spills dike spilled material or otherwise contain material to ensure runoff does not reach a water way. place spilled in an appropriate container for disposal. Min
22、imize contact of spilled material with soils to prevent runoff to surface waterways. Keep out of waterways .Treat as an oil spill. insoluble in water.Section7.Handling and StorageHandling Avoid breathing vapors or spray mists. Adequate ventilation should be provided if there is risk of aerosol forma
23、tion .Keep away from sources of ignition, Ground all equipment containing material. Do not pressurize, cut, weld, braze, solder, drill, or expose containers to heat of sources of ignition. To avoid fire or explosion, dissipate static electriciry during transfer by grounding and bonding containers an
24、d equipment before transfeming material. wash thoroughly after handling. Avoid prolonged contact with skin. Avoid contact with eyes. Empty containers may contain harmful, flammable/combustible of explosive residue or vapors. Do not cut, grind drill, weld ,reuse or dispose of containers unless adequa
25、te precautions are taken against these hazards.Storage Store in a segregated and approved area. A Potentially flammable atmosphere may be generated if material is held hot for prolonged periods. For prolonged storage at temperatures of 60C and above ,keep in rust-free tanks and exclude oxygen by use
26、 of a nitrogen blanket Heating systems which generate localized hot spots should never be used. Suitable storage materiaks are: mild steel/carbon-steel.Store-and-use-away-from heat ,sparks,-open,-flame,-or any other ignition source-.keep container tightly closed in a cool,-well-ventilated place.Continued on Next Page
