1、MTK Solution Software Upgrade MethodCaution: Software Upgrade is a complicated progress, must be done by a professional.Solution: MTKDisc: CD-R/RWEquipment: Computer with CD Recordable driverProcess:1. Check the player Software versiona. Switch on the player.b. Press Setup button on the remote contr
2、ol.c. Press 1-3-7-9 button on the remote control.d. Check the TV screen as following:Version : XXXXXXXXSub-ver : XXXXXXXXServo: XXXXXXXX2. Burn CD-R/RW disca. Put an empty CD-R/RW disc in a computer driver. b. Change CDs ID ( label ) as: TCL.c. Change the upgrade file name as: TCLF61.BIN,.Caution: 1
3、) the CDs ID (label) and upgrade file name must be CAPITAL word.2) BIN is the extent name of the software file, means the file is a binary file.d. Select the burn-in data format to ISO9660 and burn the file in the CD-R/RW.3. Upgrade the player Softwarea. Put the CD in the player.b. If the player fin
4、ds the upgrade file, it will pop a dialog to give user a tip to upgrade, press OK to upgrade the SW. c. After finish reading the data of upgrade SW, the tray will be opened and take the disc out (dont leave the disc in the tray or not the set will restart and upgrade again), Wait a moment, two or th
5、ree minutes, for the upgradingCaution: Please dont switch the power off! Otherwise, the player will hang up and never switch on. d. If the player finish upgrading, it will restart. MTK 方案软件升级方法警告：软件升级是一项非常复杂的工作,非专业人员切忽操作 !方案: MTK光盘: CD-R/RW所需设备: 带 CD 刻录功能的电脑过程:1. 检验机器的软件版本a. 打开机器，并开仓。b. 按遥控器 “设置”键。b
6、. 依次按遥控器按键 “1-3-7-9”键。c. 检测电视机屏幕显示的软件版本信息：Version : XXXXXXXXSub-ver : XXXXXXXXServo: XXXXXXXX2. 刻录 CD-R/RWa. 将一张空 CD-R/RW 光盘放入电脑光驱。b. 光盘的光标改为： TCLc. 将文件名改为：TCLF61.BIN警告：1) 文件名必须用大写字母；2) “BIN”是文件的扩展名d. 请选择 ISO9660 的抄写格式，并刻录光盘。3. 升级机器软件a. 将已经刻录好的 CD-R/RW 光盘放入机器。b. 机器找到升级光盘后，电视屏幕会显示提示语，按下遥控器“OK ”键，机器开始升级。电视屏幕显示升级的进程。10 秒后，机器将自动出仓，请取出光盘。c. 等待机器升级 2 到 3 分钟。警告：升级过程中切忽断电，否则机器会由于程序无法刷新而导致死机！d. 升级完毕机器将自动待机，并重新启动。
