1、YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADAYAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANYYAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBRO
2、ISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCEYAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLANDYAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VSTRA FRLUNDA, SWEDENYAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARK
3、ET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA 2006 All rights reserved.RX-V659Printed in Malaysia WG73740RX-V659AV ReceiverOWNERS MANUALURX-V659_U_cv.fm Page 1 Wednesday, November 23, 2005 11:09 AM来自 中国最大资料库下载IMPORTANT SAFET
4、Y INSTRUCTIONS Explanation of Graphical SymbolsThe lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous voltage” within the products enclosure that may be of sufficient magnitude to constitute a risk of electric sho
5、ck to persons.The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.1 Read Instructions All the safety and operating instructions should be read before
6、 the product is operated.2 Retain Instructions The safety and operating instructions should be retained for future reference.3 Heed Warnings All warnings on the product and in the operating instructions should be adhered to.4 Follow Instructions All operating and use instructions should be followed.
7、5 Cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.6 Attachments Do not use attachments not recommended by the product manufacturer as they may cause hazards.7 Water and Moisture Do not use this product near water for example, near a b
8、ath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.8 Accessories Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the produc
9、t. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturers instructions, and should use a mounting accessory recommended by the manufacturer.9 A product and cart combination should b
10、e moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn.10 Ventilation Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these open
11、ings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturers instructi
12、ons have been adhered to.11 Power Sources This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery
13、 power, or other sources, refer to the operating instructions.12 Grounding or Polarization This product may be equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If y
14、ou are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.13 Power-Cord Protection Power-supply cords should be routed so that
15、they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.14 Lightning For added protection for this product during a lightning storm, or when it is left
16、unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.15 Power Lines An outside antenna system should not be located in the vicinity of overhead power l
17、ines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.16 Overloading Do not overload wall o
18、utlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.17 Object and Liquid Entry Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire o
19、r electric shock. Never spill liquid of any kind on the product.18 Servicing Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.19 Damage Requiring Service Unplug this
20、product from the wall outlet and refer servicing to qualified service personnel under the following conditions:a) When the power-supply cord or plug is damaged,b) If liquid has been spilled, or objects have fallen into the product,c) If the product has been exposed to rain or water,IMPORTANT SAFETY
21、INSTRUCTIONSCAUTIONCAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.RISK OF ELECTRIC SHOCK DO NOT OPEN来自 中国最大资料库下载iIMPORTANT SAFETY INSTRUCTIONSEXAMPLE OF ANTENNA GROUNDINGMASTGROUNDCLAMPANT
22、ENNALEAD INWIREANTENNADISCHARGE UNIT(NEC SECTION 81020)GROUNDING CONDUCTORS(NEC SECTION 81021)GROUND CLAMPSPOWER SERVICE GROUNDINGELECTRODE SYSTEM(NEC ART 250. PART H)ELECTRICSERVICEEQUIPMENTNEC NATIONAL ELECTRICAL CODEd) If the product does not operate normally by following the operating instructio
23、ns. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation,e) If the product has been dropped or damaged
24、in any way, and f) When the product exhibits a distinct change in perfor-mance - this indicates a need for service.20 Replacement Parts When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the
25、 original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.21 Safety Check Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.22 Wall or Cei
26、ling Mounting This unit should be mounted to a wall or ceiling only as recommended by the manufacturer.23 Heat The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.24 Outdoor Antenna Grounding If a
27、n outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper gr
28、ounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.Note to CATV system installer:This reminder is
29、provided to call the CATV system installers attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.FCC INFOR
30、MATION (for US customers)1 IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product.2 IMPORT
31、ANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA.3 NOTE
32、: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class “B” digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful
33、 interference with other electronic devices.This equipment generates/uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful to the operation of other electronic devices.Compliance with FCC regulations does not gua
34、rantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning this unit “OFF” and “ON”, please try to eliminate the problem by using one of the following measures:Relocate either this product or the device
35、that is being affected by the interference.Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s.In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to co
36、axial type cable.If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Electronics Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA 90
37、620.The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries.来自 中国最大资料库下载iiCAUTION: READ THIS BEFORE OPERATING YOUR UNIT.1 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference.2 Ins
38、tall this sound system in a well ventilated, cool, dry, clean place away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. Allow ventilation space of at least 30 cm on the top, 20 cm on the left and right, and 20 cm on the back of this unit. 3 Locate this unit away from oth
39、er electrical appliances, motors, or transformers to avoid humming sounds.4 Do not expose this unit to sudden temperature changes from cold to hot, and do not locate this unit in a environment with high humidity (i.e. a room with a humidifier) to prevent condensation inside this unit, which may caus
40、e an electrical shock, fire, damage to this unit, and/or personal injury.5 Avoid installing this unit where foreign object may fall onto this unit and/or this unit may be exposed to liquid dripping or splashing. On the top of this unit, do not place: other components, as they may cause damage and/or
41、 discoloration on the surface of this unit. burning objects (i.e. candles), as they may cause fire, damage to this unit, and/or personal injury. containers with liquid in them, as they may fall and liquid may cause electrical shock to the user and/or damage to this unit. 6 Do not cover this unit wit
42、h a newspaper, tablecloth, curtain, etc. in order not to obstruct heat radiation. If the temperature inside this unit rises, it may cause fire, damage to this unit, and/or personal injury.7 Do not plug in this unit to a wall outlet until all connections are complete.8 Do not operate this unit upside
43、-down. It may overheat, possibly causing damage.9 Do not use force on switches, knobs and/or cords.10 When disconnecting the power cable from the wall outlet, grasp the plug; do not pull the cord.11 Do not clean this unit with chemical solvents; this might damage the finish. Use a clean, dry cloth.1
44、2 Only voltage specified on this unit must be used. Using this unit with a higher voltage than specified is dangerous and may cause fire, damage to this unit, and/or personal injury. YAMAHA will not be held responsible for any damage resulting from use of this unit with a voltage other than specifie
45、d.13 To prevent damage by lightning, keep the power cable and outdoor antennas disconnected from a wall outlet or this unit during a lightning storm.14 Do not attempt to modify or fix this unit. Contact qualified YAMAHA service personnel when any service is needed. The cabinet should never be opened
46、 for any reasons.15 When not planning to use this unit for long periods of time (i.e. vacation), disconnect the AC power plug from the wall outlet.16 Install this unit near the AC wall outlet where the power cable plug can be reached easily.17 Be sure to read the “TROUBLESHOOTING” section on common
47、operating errors before concluding that this unit is faulty.18 Before moving this unit, press MASTER ON/OFF to release it outward to the OFF position to turn off this unit, and then disconnect the power cable from the AC wall outlet.19 VOLTAGE SELECTOR (Asia and General models only)The VOLTAGE SELEC
48、TOR on the rear panel of this unit must be set for your local main voltage BEFORE plugging into the AC wall outlet. Voltages are:Asia model 220/230240 V AC, 50/60 HzGeneral model 110/120/220/230240 V AC, 50/60 HzWe Want You Listening For A Lifetime YAMAHA and the Electronic Industries Associations C
49、onsumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion and, most importantly, without affecting your sensitive hearing.Since hearing damage from loud sounds is often undetectable until it is too late, YAMA HA and the Electronic Industries Associations Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels.CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.WARNINGTO REDU
