1、Step 1Select a new 1024px by 768px web document with a color mode of RGB and Screen set to 72ppi.Step 2Select the Ellipse Tool (L) and click on your artboard in the Ellipse dialog box. Set the Width and Height at 400px and then click OK. Select the circle and set the foreground color to none and str
2、oke color to K=88. Change this layer name to “tire.“Step 3Select the circle, then go to Effect 3D Extrude and Bevel. Click the More Options button and set the options as shown below and then click OK.Step 4Select the Rectangle Tool or press M, then click on the artboard and in the dialogue box set t
3、he width and height to 600px by 4px respectively. Now set the fill color to K=90. Then create a rectangle (M) with a width of 4px and height 14px respectively (see 4a below).Set the fill color to K=90. For the two rectangles, select a foreground color of K=100 and set the stroke to none. Press Shift
4、 + F7 to bring up the Align pane. Now select these two newly created rectangles and click Vertical Align Bottom and Horizontal Align Left in the Align Objects group of the Align pane.Select the mini rectangle and move it 7 pixels up by pressing the Up Arrow key. Then make a copy of the mini-rectangl
5、e (by pressing Command + C then Command + F) and move it to the right side of the long rectangle. Be sure to keep the Shift key pressed while moving it (4b).Select the long rectangle and right mini-rectangle, then press Horizontal Align Right in the Align Objects group of the Align pane. Select the
6、two mini-rectangles and go to Object Blend Blend Options. then in the Spacing section select Specified Steps value of 50 and set the Orientation to Align to Path, and click OK (4c).Press Command + Alt + B to make a blend. Your result should be exactly as shown below (4d).Step 5Select the blended min
7、i-rectangles and press Command + Alt + Shift + D, then in the dialogue box set the Vertical value to -24 px in the Move group and click Copy (5a). Now select the long rectangle and upper blended mini-rectangle. Press Command + Alt + Shift + D again, then set the Vertical Align to 24 px. Now click Co
8、py (5b). Keep the selection and press Command + D. Your result should to be exactly as shown below (5c).Step 6Press A or select the Direct Selection Tool from the Tool Pallet. Select the lower two points of the right most and left most mini-rectangles of the very lower blended mini-rectangles (6a).
9、Press the Shift key and then press the Right Arrow key once. Do the same for the upper blended mini-rectangles (6b).Select all the blended mini-rectangles and go to Object Expand, then in the Expand dialogue box make sure both Object and Fill are ticked, and click OK (6c). Group all the mini and lon
10、g rectangles. Select the group, then copy (Command + C) and paste in place (Command + F). Drag it 150px down by pressing the Down Arrow key 15 times, also keep the Shift key pressed while dragging (6d).Keep the selection of the lower group, and then copy it and paste it in front. Now press Shift + F
11、8 to bring up the Transform Pallet. Dont loose the upper group selection, now in the Transform pallet set the width to 610px. Also, make sure your Constraining Width and Height Proportions is enabled (6e).Now select the lower two stripes, then in the Pathfinder Pallet click Intersect Shape Areas, an
12、d click Expand in the Shape Modes (6f). Now set the shaped stripe fill color to K=100 (6g). Select the upper and lower stripe and click Vertical Align Center in the Align Objects group of the Align Pallet (6h). The result is shown in the last image below (6i).Step 7Now select both stripes and drag t
13、hem inside the Symbols Pallet in the Symbol Options dialogue box. Now name it “stripe“ and set the Type to Graphic (7a). Now you can delete the stripe symbol from your artboard.Step 8Select the tire and press Shift + F6 to bring out the Appearance Pallet. In the Appearance Pallet you will find the 3
14、D Extrude & Bevel option, go ahead and click on it. In the 3D Extrude & Bevel Options check the Preview (8a). Now click the Map Art button. In the Map Art dialogue box for the Surface field type 6 and then press Enter (8b). Now in the Symbol field select our stripe symbol (8c). Scale it as shown (8d
15、), then click OK and back to the artboard. The result is shown in the last image below (8e).Step 9Select the tire and go to Object Expand Appearance. Now Ungroup the tire three times and select the striped part of the tire (9a). Right-click on it and select Release Clipping Mask (9b).Step 10Select t
16、he tire stripe, cut it (Command + X) and make a new layer from the Layers Pallet. Now name it “stripe“ and paste it in place (Command + F). Lock the “stripe“ layer. Now select the whole tire layer, click Add to Shape Area, then Expand in the Pathfinder Pallet (10a).Step 11Make a new circle with 400p
17、x by 400px dimensions. Set the Stroke color to K=100, and set the fill color to none. Now select the circle and press the S key and Enter. Now in the Scale dialog box type 80 in the Scale field and click Copy (11a).Keep the selection and then press the Enter key again. Type 90 in the Scale field and
18、 click Copy (11b). Select and cut (Command + X) the bigger circle. Create a new layer, name it “circle 1,“ and paste in front (Command + F).Select and cut (Command + X) the medium circle. Make a new layer name it “circle 2.“ Paste in front (Command + F), then select the inner most circle. Cut (Comma
19、nd + X) it and take a make layer named “wheel,“ and paste in front (Command + F). The result so far is shown below (11c).Step 12Select the “wheel,“ press S, and then Enter. Now in the Scale dialogue box type 45 in the Scale field, then click Copy. Cut the mini-circle and make a new layer and name it
20、 “mini_circle“ (12a). Select “circle 2,“ then in the Stroke Pallet click Align Stroke to Inside, and enter a weight of 18pt (12b). Now select “wheel“ and do the same as with “circle 2,“ but set its Stroke Weight to 80pt (12c).Step 13Select the wheel and set its Dashed Line to 89pt for the first dash
21、 and gap to 92pt, as shown below (13a). Select the “wheel“ and “circle 2“ and go to Object Expand Appearance, then click Expand in the Pathfinder Pallet. Now you can delete the “circle 2“ layer your “circle 2“ is already copied to the “wheel“ layer. This is because the upper layer takes precedence,
22、as shown below (13b).Step 14Select the “mini_circle,“ then press S. Enter a Scale value of 200 and press Copy. Again select the “mini_Circle“ and press S and then Enter. Now type in a Scale value of 130 and press Copy. Lock the “mini_circle“ layer (14a).Select the Add Anchor Point Tool. With this to
23、ol, add anchor points to every center of the wheel, as shown below (14b). Now with this tool, add more anchor points to the intersected area of the wheel with two newly create circles from the “mini_circle,“ as shown below (14c to 14d). Now unlock the “mini_circle“ layer and select only the “mini_ci
24、rcle“ and “wheel“ layers, click Add to Shape Area, and then Expand in the Pathfinder Pallet.Now delete those two circles, what we created from the “mini_circle“ earlier. Change the name of the “mini_circle“ to “wheel“ and delete the older “wheel“ layer. Select the Add Anchor Point Tool, now make som
25、e anchor points in the gap of the wheel to the edge of the “mini_circle“ as shown (14e).Step 15Select the Delete Anchor Point Tool from the Tool Pallet. Now remove all the corner anchor points of the wheel as shown in (15a). Now use Convert Anchor Point Tool or press Shift + C to smooth the mini_cir
26、cle edge as shown in image- 15b repeat this same mechanism to smooth all other mini_circle edges as well.See this image to the idea how you should to convert your anchor points (15c). Now select the corner points(15d) with Direct Selection Tool (A) then click Convert Selected Anchor Points to Smooth
27、 as in (15e). Repeat these step to smooth all other corner points of the wheel. Your final image should to look like image (15f).Step 16Create a new layer name it “wheel top.“ Create a circle with 35px by 35px size. Then set its Fill and Stroke color to K=100. Also, set its Align Stroke to Outside,
28、Weight to 37pt, Dashed Line to first dash 12pt and first gap 10pt (16a).Lock all layers except the newly created “wheel top“ layer. Select the “wheel top“ and go to Object Expand Appearance, then right-click on it and select Ungroup. Select the circle of the “wheel top“ (16b) and make it slightly bi
29、gger by dragging it, keep pressing Command + Shift while dragging to get the perfect shape and position.Now select the circle and stroke shape and click Add to Shape Area, then Expand in the Pathfinder Pallet as shown (16c). Create a new circle with 85px by 85px size and align it center of the “wheel top.“ Do this by selecting “wheel top“ and the circle, then click Horizontal Align Center and Vertical Align Center in the Align Objects group of the Align Pallet (16d).
