分享
分享赚钱 收藏 举报 版权申诉 / 3

类型模具开发协议(中英文).docx

  • 上传人:wo7103235
  • 文档编号:5863521
  • 上传时间:2019-03-20
  • 格式:DOCX
  • 页数:3
  • 大小:16.73KB
  • 配套讲稿:

    如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。

    特殊限制:

    部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。

    关 键  词:
    模具开发协议(中英文).docx
    资源描述:

    1、模具开发协议mold developing agreement合同号/contract no. 甲方: (hereinafter “party a”)乙方: (hereinafter “party b”)individuallycalled party a and party b respectively and/or the “party” and together, called the “parties”.经过友好协商和在公平、平等的原则基础上,双方约定如下:after friendly consultations and proceeding on principles offairn

    2、ess and equality, the parties have agreed the following:一、 模具内容(包括材料)/mold info.(including materials)二、 模具价格表/mold price list产品型号part no.模具规格mold description 计量单位unit数量quantity单价(人民币)unit price(rmb)总价(人民币)total price(rmb)(以上价格已含 17%的增值税,且包含模具送到 的运费。)(the above prices include vat 17% and the molddeli

    3、very to .)三、 模具开发周期及要求/work day 开发时间/developmenttime:从首件样品到整个样件提交需要 天/ days fromfirst sample pour to sample submission.2) 模具验收/mold inspection:模具必须符合甲方的技术要求。the product shall completelyfit the technical requirements.3) 由于模具的开发周期和质量问题造成甲方项目延期,乙方将赔偿甲方的一切损失。ifparty as project delayed due to the work da

    4、y and the quality of the mold,party bshould compensateparty a for all the losses.四、 模具的维护/mold maintenance正常使用寿命内的模具在生产过程中发生的损坏或磨损,相关的维修及保养等都由乙方负责。if the mold is within the normal working life but damaged or worn duringthe production process, party b should be responsible for the related repairand m

    5、aintenance.五、 模具费用的支付/paymentterms在铸件得到最终用户的确认及甲方收到最终用户模具费用后 30天内支付。party a will fullypay to party b within 30 days after casting approval by final customer, andreceipt of tooling payment by party a.六、 模具所有权/ownership模具的所有权为甲方所有,甲方享有收回和处理的权利。molds ownershipbelongs to party a. party a enjoys the righ

    6、t to taking back and dealing withthe mold.七、 保密责任/confidentiality1) 未经甲方允许,乙方不得将甲方所提供的图纸及技术资料以口头、书面、出示和借用的方式转泄露给第三方。如有发生信息泄露,甲方有权追究其法律责任。without the permission of party a, party b should not disclose thedrawings and technical information which are provided by party a in oral,written, showing and len

    7、ding way to the third party. if party b revealed such information,party a has the right to pursue party bs legal responsibility.2) 当 双方履行完该协议后,乙方必须归还甲方所提供的用于开发该模具的所有保密信息及其全部副本(不论其是否是在计算机磁盘、光盘读取器、光盘、硬盘或软件中或 硬拷贝载体上存储、保存或记录的);如果乙方退还上述保密信息及其全部副本为不可行,则应将其销毁,或者从计算机或其他电子系统中将其删除或抹除。after the parties fulfill

    8、 the agreement, party b should return toparty a all confidential information and all copies of developing the mould thereofwhether or not the same are stored, maintained or recorded in computer disks,cd-rom drives, cd-roms, hard disks or software or in hard copy format and, tothe extentthat it is no

    9、t feasible to return the same, shall destroy suchconfidential information or cause the same to be deleted or erased from anycomputer or other electronic system.八、 其他约定/others1) 本协议受中华人民共和国的法律法规管辖,并应依照中华人民共和国的法律法规解释。theagreement shall be governed by, and interpreted in accordance with,the laws and re

    10、gulations of the peoples republic ofchina.2) 除非双方采用书面形式,否则对本协议的任何修正均属无效。any amendments to this agreement shall not be valid unless made bytheparties in writing.3) 本协议一式两份,每份皆具有同等法律效力。this agreement is made in two original copies, both of which areequally valid.4) 本协议在双方签订本协议之日立即生效。this agreement sha

    11、ll take effect immediately upon the date ofexecution by the parties.5) 凡涉及本协议或因本协议而发生的所有争执,都应通过友好协商解决。如果在书面要求协商的通知发出后的三十(30)天内不能解决,则该争执应提交乙方所在地有管辖权的法院进行裁决。all the disputes and controversies of every kind and nature betweenthe parties arising out of or in connection with the agreement or the executio

    12、nhereof shall be settled by friendly negotiation between the parties. if nosettlement can be reached within thirty (30) days after delivery of the writtennotice requesting the said negotiation, such dispute or controversy shall besubmitted a competent court located in the business place of party a forjudgment.6) 当本协议中文文本与英文文本发生歧义时,应以中文文本为准。the chinese version of this agreement will prevail if there is anyconflict between the chinese version and english version of this agreement.甲方: party a: 签字: 盖章:signature: seal:日期: date: 乙方: partyb: 签字: 盖章:signature: seal:日期: date:

    展开阅读全文
    提示  道客多多所有资源均是用户自行上传分享,仅供网友学习交流,未经上传用户书面授权,请勿作他用。
    关于本文
    本文标题:模具开发协议(中英文).docx
    链接地址:https://www.docduoduo.com/p-5863521.html
    关于我们 - 网站声明 - 网站地图 - 资源地图 - 友情链接 - 网站客服 - 联系我们

    道客多多用户QQ群:832276834  微博官方号:道客多多官方   知乎号:道客多多

    Copyright© 2025 道客多多 docduoduo.com 网站版权所有世界地图

    经营许可证编号:粤ICP备2021046453号    营业执照商标

    1.png 2.png 3.png 4.png 5.png 6.png 7.png 8.png 9.png 10.png



    收起
    展开