1、Copyright2009-2012USERS MANUALINVERTERPure sine-wave seriesProduct name Agent or dealer(stamp)Style NO. CheckerTELLinkmanSeries NO.ADD.TELPurchased date FaxMaintain recordDeliver date Maintain content Repairman Remark6Please strictly comply with the warnings and operation guides explained in this ma
2、nual. And keep the book properly.Dont operate this machine before reading all the safety instructions and operation guides. Otherwise, it will damage the devices or even cause safety accidents！Note: 1.Connect the DC input cable for use make sure when you distinguish between being “+“negative “-“ pol
3、e, as a direct result of inadvertent connection error will damage the inverter!2.When press the “on” button, at the same time must be see the green light and hear the sound of relay, keep press “on” button about 3sec, until buzzer sound, stop to press “on” button, the inverter will be turn on.3.If d
4、idnt follow steps 2 leading to not boot properly, please disconnect the battery cable, and then start button for about 10 seconds or continuous press several times, and then reconnect the battery cable, at last follow 1 step to operation.Content1.Operation instructions12.Feature 23.Scope 24.Installa
5、tion instructions 25.Front panel directions3-46.Specification57.Free repair and maintenance66. Technical SpecificationsPower(W) 300 500 750 1K 1.5K 2K 3K 5K 8K 10KDC voltage 12/24V 24/48V 48V 48/96V 96/192VInput voltage 160-265VACInput frequency 4565HzInverter output voltage 220VAC5%/50Hz1%Inverter
6、output waveshape pure sine-waveTransfer time 120% 100ms; 150%, 50ms output short circiut 150msNoise 45dBOperation temperature 0-40Storage temperature -15 - +50Humidity 0-90%(non-condensing, max)Operating height above sea level0-3,000meterStorage height above sea level0-15,00meter51. ON/OFF button 2.
7、 output voltage 3. load capacity4. load capacity 5. frequency display （DC model）6. input voltage（AC model） 7. LINE AC input light8. INV inverter light 9. FAULT fault light 1. LCD display 2. LINE AC input light 3. INV inverter light 4. CHA charging light 5. FAULT fault light 6. ON/OFF button 7. CHK b
8、utton 41. Secure Operation PrecautionsWe have fully considered personal and state safety factors when designing the product. But improper operation may cause safety accident, so please comply the followings when using or installing for your safety and benefits:(1) When installing the inverter, profe
9、ssional operators are needed or connect with the dealer.(2) Assure the electric power supply meets the standard. The battery DC voltage is the correct : the DC voltage input range is 15% , the battery and the inverter input connector plus-minus polarity must be correctly.Special notice: this product
10、 uses single-phase 220V voltage. Please check whether the output connector is connected well. Please confirm the load power dont be over the inverter power.(3) Dont douse any liquid into the inverter or use wet cloth to wipe the cabinet. Never touch the AC output or input connector with wet hands.(4
11、) Never make bold to replace the accumulator connection wire of the inverter, if needed, please contact the service department to confirm it.(5) Please dont use the inverter in sloppy, dusty, high temperature or temperature varies too sharply environment. Suggested environment temperature is 045. Pl
12、ease dont jam the louver beside the machine or use the machine beside heat sources such as electric heater and radiator. Please avoid sunshine,dust and the dewing situation.(6) Dont let self-determination deficient people (such as a child) use the product. (7) Make sure connect ground wire when conn
13、ecting the machine with indoor electric supply net, and the size of the input wires should meet the demand of indoor loads, or it will heat deal if the size of the wire is too small and may cause fire accident. Suggested the machine should be operated by professional technicians. 12. Performance Spe
14、cification of Intelligent inverter(1) The inverter is designed by our company independently; its controlled by CPU, high quality and modify sine wave intelligent inverter(2) Our product is used for the many kinds of the single phase equipments, example: motor, screw tools,tube light etc.family equip
15、ments, and also it can be used for the industry and communication equipments.(3) Single key intelligent switching, easy to operated(4) Output short circuit protection (when the inverter is working on battery mode): when there is short circuit, the inverter will indicate it and the machine will shut
16、down automatically.(5) Overload protection: when there is overload, the machine will prompt you and protect the inverter from being damaged automatically. Over 100%-120%, inverter shuts down 30s later, over 150%, inverter shuts down at once.(6) Internal circuit can protect the battery .when the batt
17、ery voltage is under the 15% level,the inverter will be shut down at once.Warnning :A.If not allowed by our company, this device cant supply power for the equipments which maintain the life B.This products is designed to supply the reserve inverted power for the home electric appliances, so its not
18、fit for the precision equipmentsC.If it is used for the computer, the computer must have a enough power inside. Or the computer maybe is restarted, when the city power is interrupted.3. Use range of Intelligent inverterit can be used for t family equipments, and also the industry and communication e
19、quipments.4. Installation Guides for inverter (1) 1000W power output and the following connections using the form of Multi-outlet, DC input lead straight out of the use of connected(2) 1000W power output over using the form of Multi-outlet and output terminal block , DC input terminal station used t
20、o connect(3) Multi-outlet can load less than 10A220VAC equipments.25. Explanation about the indication and status of Panelsindication statusFAULTlamp onOverload, inverter will shut down automatically when switching to battery for power supply , no output , or inverter failure , output short circuitINV lamp on inverter modeLINE lamp on inverter works at utility power modeBUZZER inverter is normal every 4 seconds 1 sounding, if inverter is over load,mistake ect. , it will keep on sounding;3
