1、一键系统封装工具（One click system package tool）First, the basic work1. Prepare the required tool software ( provides download)*SOr add the DllcacheManager /restore /autodelete /timeout item in the relevant batch file (e.g., the first operation order after entering the system) in the Sysprep.inf file. It can
2、 extract the DllCacheManager.rar file to any one of the current location of the system partition, after running DllCacheManager.exe, select “restore automatically delete“ or “recovery when the countdown and delete their own“ backup in the next system start will automatically restore the backup and d
3、elete their own.Two, systematic weight loss (optional)In order to reduce the time required to restore image backup file Ghost, or on a CD-ROM as much as possible to install more software, which requires the Ghost backup documentation was small enough, so we need to carry out a series of work on the
4、system to lose weight. Of course, if you dont mind the size of the Ghost backup file, you dont need to lose weight on the system.1. Shut down system restoreOpen the control panel and double-click the system“. In the system property panel, select “system restore“, select “turn off System Restore on a
5、ll drives“, and then click “OK“.The system restore function of WindowsXP takes up a lot of disk space, so it must be shut down to reduce the system volume. After shutting down the system restore, the contents of the System Volume Information directory in the system partition root directory will be e
6、mptied immediately, so you can also open the function after closing the system restore.2. Shut down system sleepOpen the control panel, double-click the “Power Options“, select “sleep“, remove the “hibernate“ before the hook, and then “point“ to determine“. When the system partition C: the root dire
7、ctory of the hiberfil.sys file will automatically delete the page.The sleep function of WindowsXP is the same as the system restore, which takes up a lot of disk space. The sleeping function occupies the size of system partition and the space of physical memory is quite.3, transfer virtual memory pa
8、ge fileOpen the control panel, double-click the “system“ in the system properties panel, select the “advanced“, and then click Properties box “Settings“, select the “advanced“ virtual memory box, click the “change“, select the system partition C, select “custom size“, the initial size and the maximu
9、m value is set to “0“, and then select the stored page file partition (such as D:), and then click “Settings“, “ok“.The root directory virtual memory page file Pagefile.sys located in the system partition, the default size is 1.5 times the physical memory, is difficult to remove the stubborn hidden
10、files, so it is best to transfer it to the other partition system outside the partition, thereby reducing the system volume.Such as the use of more than v8.0 version of the Ghost cloning system, this one actually can not do, because of the use of more than v8.0 version of the Ghost can automatically
11、 delete the virtual memory page file in pagefile.sys file mirroring.4. Cleaning disks, deleting systems and IE temporary filesRun Disk Cleanup to delete system temporary filesStart - program - attachment - system tool - disk cleaning - select drive - determine - disk cleanup - select delete file - d
12、etermine.Delete IE temporary files and history recordsOpen IE - tool - Internet option - Convention delete Cookies (I) - determine delete file (F) - determine delete history (H) - determine - determine.Delete the recently used document recordStart - Settings - taskbar and start menu (T) - Start Menu
13、 - start menu (S) - Custom (C) - advanced clean list (C) - determine.5. Use DllCacheManager to backup DllCache directory file (DLL file)This step must be done after the system is packaged.Using DllCacheManager_V1.0 (Dragon Empire Special Edition) backup DllCache directory file, can reduce disk space
14、 occupied about 300M.Three, delete and change the system hardware driver (key)1 、 uninstall hardware driver0828 intelligent system packaging tools by calling Sysprep.exe for intelligent packaging (recommended). The difference between them is in the Ghost to the new machine after the installation is
15、complete, the need to manually will power management mode of a computer by Standard PC to change the power management mode corresponding to the new machine, the latter can automatically detect the hardware abstraction layer HAL type, realize the automatic recognition of power mode changes. As the S&
16、R&S_V9.5.0828 intelligent system packaging tools use Longhorn detecthal technology, so the accuracy rate of Hal can reach 100%, and is directly into the packaging process, the packaging speed is fast, no need to restart the computer many times.Note: the Windows2k/XP/2003 version of the system instal
17、led CD comes with a package tool, but not universal!1. Create sysprep.inf auto answer fileWhether the system is installed in the factory mode, or re packaged, will require the user to enter some necessary content, such as user name, computer name, installation sequence number, etc But there is a pro
18、blem in the new machine Ghost clone in the installation process, we need to enter this information, the system has not been driven to find the keyboard and mouse, keyboard and mouse in a state of suspended animation, then you must let the system automatically respond to install, so we need to have a
19、n automatic response file sysprep.inf to complete the relevant information input. The process of creating a basic fool, just follow the prompts step by step to do it, need to pay attention to is the type of installation this step must choose “Sysprep“, this step is the best choice of the license agr
20、eement “fully automatic installation“, so in the installation process without manual intervention, you can also add you need to run the command in the “run time“, such as the FAT32 conversion to the NTFS command “convert C:/FS:NTFS“, this command can be run at a time when the start after installatio
21、n.Create steps: double click the Sysprep folder in the setupmgr.exe file, create a new file to install the -Windows -sysprep XP Professional- is fully automatic installation - input name / units - enter the product key, automatically generate computer name. Sure - complete.Note: the file name of the
22、 auto answer file must be sysprep.inf, and the directory must be in the c:sysprep directory.2. Modify the background map of the installationPut a setup.bmp background map in the Sysprep folder, modify the sysprep.ini file, increase:OEM_AdsBackground=setup.bmpCan.This method is not autohal generated
23、by the setup.bmp to replace the recovery when installed on the registration screen after the installation before or will there be a minimum default logo, but a very short time, setup.bmp background is their display in the installation process of the minimum.3. Repackage the systemThe new packaging s
24、ystem can run in the Sysprep directory of the Sysprep.exe system directly run msprep.exe intelligent packaging or packaging tools for intelligent package on the system by calling Sysprep.exe, running Sysprep.exe or msprep.exe, follow the prompts to complete the system to re package.Note that the pac
25、kage options: * 4 options package system screen, second “minimum installation“ is no residual driver installation item is what we need, so we must choose. The first “no activation grace“ and third “re security identifier“ is activated with genuine users, which we use is Mianjiaoguo, so these two sel
26、ected and not selected indifferent, impact on the system after GHOST cloning in the use of all. Fourth options for detecting non plug and play hardware are not available. * shutdown mode can be selected according to need, it is recommended to choose “exit“, so that the next step to DllCache director
27、y file backup. * after the option is set, you can click on the “reset“ button, and after about half a minute, the system is re packaged.4. Backup the DllCache directory file (DLL file)Running%systemroot% directory (XP system is C:/windows directory, 2K system is C:/winnt directory) DllCacheManager.e
28、xe prompted to complete the DllCache directory file backup can reduce disk space 300M or so.Note: when used in conjunction with the S&R&S, because DllCacheManager use the registry RunOnce, when the S&R&S IDE change as a standard or change the power mode for Standard PC, RunOnce will be excited, so w
29、ant to go to the system package with DllCacheManager backup DllCache directory file (if the first backup encapsulation will cause the reduction of start package automatic backup).5, because the backup DllCache directory file (DLL file), the system reduces the disk space occupancy about 300M, so at t
30、his time it is best to do a disk defragmentation again.In the completion of the above steps, the system C is a clean system after re packaging, thus making the whole package even completed, can shut down the computer system (note, dont start this package if the restart, just make a good package syst
31、em will resume installation, above the white doing). The next job is to start the computer with DOS, and make the clean system into Ghost mirror file, so that it can be used when installing.Six. Make Ghost system mirror file=Start the computer running Ghost DOS, select the menu in the “local - Parti
32、tion - To Image“, first select the hard disk partition in the pop-up dialog box (c), and set up image file path and file name, such as “D:ghostxpghost.gho“, and then choose the compression mode, press YES“. The final generated xpghost.gho file is the Ghost system mirroring file.Be careful：* recommen
33、ded Ghost_v8.0 & v8.2 version, v8.0 version can support more than one NTFS partition, on the other hand, the v8.0 version can automatically delete the virtual memory page file “pagefile.sys“ in the production of the image file, reduce image file size.* if you want to create universal cloning can ins
34、tall more software, it is likely that the image file will exceed the capacity of a CD, then you can use Ghost volume compression function, for example, want to set the volume size is 650MB, you can enter the command “ghost -split=650“ to run Ghost, and after the introduction of the operation of the
35、front there is no difference. First, the requirements of running Sysprep toolsTo use the Sysprep tool, the hardware and related equipment of the computer must meet the following requirements:1. Reference computers and target computers must have compatible HAL. For example, MPS (multiprocessor system
36、s) based on advanced programmable interrupt controllers (APIC) must use the same APIC HAL. The system based on standard HAL programmable interrupt controller (PIC) is not compatible with APIC HAL or MPS HAL.2. Reference computers and target computers must have the same advanced configuration and pow
37、er interface (ACPI) support.3. Plug and play devices for reference computers and target computers (such as modems, sound cards, network adapters, and video cards) do not have to come from the same manufacturer. However, drivers for these devices must be provided.4, third party disk imaging software
38、or disk replication hardware devices are required. These products can create a binary image of the computers hard disk and copy the image to another hard disk or file stored on a separate disk.5. The size of the hard disk on the target computer must be at least the same as the size of the hard disk
39、on the reference computer. If the hard disk on the target computer is larger, the difference is not included in the primary partition. However, if the primary partition is formatted using the NTFS file system, you can use Sysprep.Extending the primary partition in the INF file of the ExtendOemPartit
40、ion file.Two. Prepare a reference computer for Sysprep deploymentTo prepare a reference computer for Sysprep deployment in Windows XP, follow the steps below:1. Install the operating system on the reference computer and any program that you want to install on the target computer.2. Click start, clic
41、k Run, type CMD, and then click ok“.Win=r can also be turned on3, at the command prompt, go to the root folder of the drive C, and then type MD Sysprep.4. Insert the Windows XP operating system disk into the correct CD-ROM or DVD-ROM drive, and then open the Deploy.cab file in the SupportTools folde
42、r. Note: to ensure that the Deploy.cab version of the correct version of Service Pack is used, use the Deploy.cab file that is distributed with this Service Pack. Please visit the Microsoft website below to download the correct version of Service Pack:Http:/ Displaylang=zh-cn (http:/ Displaylang=zh-
43、cn)5. copy the Sysprep.exe file and the Setupcl.exe file into the Sysprep folder. Note: if you use the Sysprep.inf file, you should also copy the file to the Sysprep folder. In order for Sysprep tools to run properly, Sysprep.exe files, Setupcl.exe files and Sysprep.inf files must be in the same fol
44、der.6. take out the Windows XP operating system cd.7. at the command prompt, type CD Sysprep to go to the Sysprep folder.8. to run the Sysprep tool, type the following command at the command prompt:Sysprep /optional parameterNote: to see the parameter list, see the “Sysprep parameter“ section. If yo
45、u run the Sysprep.exe file from the%systemdrive%Sysprep folder, the Sysprep.exe file will delete the entire folder and its contents at the end of the run.9. Microsoft recommends that you run the Sysprep.exe file on the reference computer, isolate the reference computer from the local network, and th
46、en deploy the image in the local network to avoid any NetBIOS conflicts. This will allow the Sysprep tool to complete the installer, add the specified domain, and use the new computer name specified in the Sysprep.inf response file.Three. Create Sysprep.inf response fileThe Sysprep.inf response file
47、 is a text file that will be scripted for replies to a series of graphical user interface (GUI) dialog boxes. Sysprep.inf answer file to create the Sysprep tool use, you can use a text editor, or included in the Windows XP CD and also includes installation manager at Microsoft Windows XP Resource to
48、ols in Kit. You must rename the answer file to Sysprep.inf and put it in the Sysprep folder under the root directory of the Windows XP driver, or you can put the files on the floppy disk. If the name of the Sysprep folder is different, the installer will ignore it. There is no parameter specified to
49、 minimize the installation wizard response file.1 、 Sysprep.inf response file format and parametersThe Sysprep.inf response file format and parameters are the same as those of the Windows XP Unattended.txt file, but only the following parts and parameters are supported:UnattendedExtendOemPartitionOemPnPDriversPathOemSkipEulaInstallFilesPathKeepPageFileResetSourcePathUpdateHALupdateuphalupdateinstalleddriverstapiconfigured guiunattended 修正自动登陆autologonc
