1、ICS 17.040.20; 25.160.10 Thermisches Schneiden Einteilung thermischer Schnitte Geometrische Produktspezifikation und Qualitt (ISO 9013 : 2002) European Standard EN ISO 9013 : 2002 has the status of a DIN Standard. A comma is used as the decimal marker. National foreword This standard has been publis
2、hed in accordance with a decision taken by CEN/TC 121 to adopt, without alteration, International Standard ISO 9013 as a European Standard. The responsible German body involved in its preparation was the Normenausschuss Schweitechnik (Welding Standards Committee), Technical Committees Thermisches Sc
3、hneiden. DIN EN 22553 is the standard corresponding to International Standard ISO 2553 referred to in clause 2 of the EN. Amendments This standard differs from the May 1995 edition in that it has been completely revised. Previous editions DIN EN ISO 9013: 1995-05; DIN 2310-1: 1965-02, 1975-02, 1987-
4、11; DIN 2310-2: 1971-06, 1976-05, 1987-11; DIN 2310-3: 1975-02, 1987-11; DIN 2310-4: 1977-11, 1987-09; DIN 2310-5: 1980-09, 1990-12. National Annex NA Standard referred to (and not included in Normative references, Bibliography and Annex ZA) DIN EN 22553 Welded, brazed and soldered joints Symbolic r
5、epresentation on drawings (ISO 2553 : 1992) Ref. No. DIN EN ISO 9013 : 2003-07 English price group 13 Sales No. 1113 11.03 DEUTSCHE NORM July 2003 EN ISO 9013 Continued overleaf. EN comprises 25 pages. No part of this standard may be reproduced without the prior permission of DIN Deutsches Institut
6、fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany, has the exclusive right of sale for German Standards (DIN-Normen). Thermal cutting Classification of thermal cuts Geometrical product specification and quality tolerances (ISO 9013 : 2002) English version of DIN EN ISO 9013 Supersed
7、es May 1995 edition, DIN 2310-1 and DIN 2310-2, November 1987 editions, DIN 2310-4, September 1987 edition, and DIN 2310-5, December 1990 edition.English version ICS 25.160.10 Descriptors: Thermal cutting Classification of thermal cuts Geometrical product specification and quality tolerances (ISO 90
8、13 : 2002) 2002. CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national members. Ref. No. EN ISO 9013 : 2002 E Thermisches Schneiden Einteilung thermischer Schnitte Geometrische Produktspezifikation und Qualitt (ISO 9013 : 2002) This European Standard was app
9、roved by CEN on 2002-08-19. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national st
10、and- ards may be obtained on application to the Management Centre or to any CEN member. The European Standards exist in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified t
11、o the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, the Netherlands, Norway, Portugal, Spain, Sweden, Switze
12、rland, and the United Kingdom.EN ISO 9013 September 2002 Management Centre: rue de Stassart 36, B-1050 Brussels European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung | Coupage thermique Classification des coupes thermiques Spcification gomtrique des pro
13、duits et tolrances relatives la qualit (ISO 9013 : 2002) Supersedes EN ISO 9013 : 1995.Page 2 EN ISO 9013 : 2002 Foreword International Standard ISO9013 :2002 Thermal cutting Classification of thermal cuts Geometrical product specification and quality tolerances, which was prepared by ISO/TC 44 Weld
14、ing and allied processes of the International Organization for Standardization, has been adopted by Technical Committee CEN/TC 121 Welding, the Secretariat of which is held by DS, as a European Standard. This European Standard shall be given the status of a national standard, either by publication o
15、f an identical text or by endorsement, and conflicting national standards withdrawn, by March 2003 at the latest. In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium,
16、the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom. Endorsement notice The text of the International Standard ISO 9013 : 2002 was approved by CEN as a Europea
17、n Standard without any modification. NOTE: Normative references to international publications are listed in Annex ZA (normative). Page 2 3 3 4 4 4 9 10 10 10 11 13 13 14 17 17 18 19 20 20 20 20 21 24 25Page 3 EN ISO 9013 : 2002Page 4 EN ISO 9013 : 2002Page 5 EN ISO 9013 : 2002Page 6 EN ISO 9013 : 20
18、02Page 7 EN ISO 9013 : 2002Page 8 EN ISO 9013 : 2002Page 9 EN ISO 9013 : 2002Page 10 EN ISO 9013 : 2002Page 11 EN ISO 9013 : 2002Page 12 EN ISO 9013 : 2002Page 13 EN ISO 9013 : 2002Page 14 EN ISO 9013 : 2002Page 15 EN ISO 9013 : 2002Page 16 EN ISO 9013 : 2002Page 17 EN ISO 9013 : 2002Page 18 EN ISO 9013 : 2002Page 19 EN ISO 9013 : 2002Page 20 EN ISO 9013 : 2002Page 21 EN ISO 9013 : 2002Page 22 EN ISO 9013 : 2002Page 23 EN ISO 9013 : 2002Page 24 EN ISO 9013 : 2002Page 25 EN ISO 9013 : 2002
