1、Copyright IPG Laser GmbH 2009 YLP Series 0.5 mJ and 1mJ energy Pulsed Ytterbium Fiber Lasers Users Guide Pulsed Ytterbium Fiber Laser YLP Series, 0.5mJ and 1 mJ pulse energy Users Guide Revision Date: 26.01.2009 Page 2 of 19 Please take time to read and understand this Users Guide and familiarize yo
2、urself with the information that we have compiled for you before you use the product. This Users Guide should stay with the product to provide you and all future users and owners of the product with important operating, safety and other information. Notices The information contained in this document
3、 is subject to change without notice. IPG Laser GmbH (IPG) believes that the information provided is accurate and reliable, however IPG makes no warranty of any kind as to the information contained in this document, including without limitation the implied warranties of merchantability or fitness fo
4、r a particular purpose. Further, IPG does not assume responsibility for use of the information contained in this document or for any infringement of patents or other rights of third parties that may result from its use. IPG shall not be liable for errors contained in this documents or for incidental
5、 or consequential damages in connection with the furnishing, performance or use of this material. IPG grants no license, directly or indirectly under any patent or other intellectual property rights from use of the information provided herein. Copyright 2009 IPG Laser GmbH. All rights reserved. You
6、may not reproduce, transmit, store in a retrieval system or adapt this publication, in any form or by any means, without the prior written permission of IPG, except as allowed under applicable copyright laws. We have identified words that we consider as trademarks. Neither the presence nor absence o
7、f trademark identifications affects the legal status of any trademarks. This product is covered by the U.S. Patents 5,422,897 and 5,774,484 and any foreign counterparts thereof, and other patent pending. Pulsed Ytterbium Fiber Laser YLP Series, 0.5mJ and 1 mJ pulse energy Users Guide Revision Date:
8、26.01.2009 Page 3 of 19 Table of Contents 1 Safety Information . 4 2 Description 9 3 Package contents 10 4 Delivery options 10 5 EMC compliance . 10 6 Mounting . 10 7 Environment conditions and precautions 11 8 Specification . 12 9 Preparation for Use and Operation . 16 10 Certification . 16 11 Warr
9、anty . 17 12 Instructions for product returns . 19 Pulsed Ytterbium Fiber Laser YLP Series, 0.5mJ and 1 mJ pulse energy Users Guide Revision Date: 26.01.2009 Page 4 of 19 1 Safety Information Safety Conversions WARNING: Refers to a potential personal hazard. ( Electrical) ( Laser radiation) It requi
10、res a procedure that, if not correctly followed, may result in bodily harm to you and/or others. Do not proceed beyond the WARNING sign until you completely understand and meet the required conditions. CAUTION: Refers to a potential product hazard. It requires a procedure that, if not correctly foll
11、owed, may result in damage or destruction to the product or components. Do not proceed beyond the CAUTION sign until you completely understand and meet the required conditions. IMPORTANT Refers to any information regarding the operation of the product. Please do not overlook this information. Pulsed
12、 Ytterbium Fiber Laser YLP Series, 0.5mJ and 1 mJ pulse energy Users Guide Revision Date: 26.01.2009 Page 5 of 19 Laser Classification This device is classified as a high power Class IV laser instrument under IEC 60825-1:2007 and 21 CFR 1040.10. This laser module is designed for OEM applications and
13、 integration into other equipment. It does not comply to all requirements of the laser product in terms of IEC 60825 and 21 CFR 1040.10. The manufacturer of the laser system is responsible for the safety compliance according to the applicable standards and regulations. WARNING: This product emits li
14、ght in the wavelength range of 10001200nm; total average power of light radiated out of the optical output is up to 70 W. This level of light may cause damage to the eye and skin. Despite the radiation being invisible, the beam may cause irreversible damage to the retina. Laser safety eyewear is not
15、 provided with this instrument, but must be worn at all times while the laser is operational. WARNING: The red guide laser may be installed in the module. It may emit up to 5mW average power near 660nm wavelength and is classified as class 3R visible laser radiation in terms of IEC 60825-1:2007. Avo
16、id direct eye exposure. WARNING: Use appropriate laser safety eyewear when operating this device. The selection of appropriate laser safety eyewear requires the end user to accurately identify the range of wavelengths emitted from this product. If the device is a tunable laser or emits light over a
17、range of wavelengths and the end user should confirm the laser safety eyewear used protects against light emitted by the device over its entire range of wavelengths. WARNING: Use of controls or adjustments or performance of procedures other than those set forth in this Users Guide and related docume
18、nts may result in hazardous radiation exposure. CAUTION: Do not install output head when the laser is active. Pulsed Ytterbium Fiber Laser YLP Series, 0.5mJ and 1 mJ pulse energy Users Guide Revision Date: 26.01.2009 Page 6 of 19 Safety Labels and Labeling Locations Laser Warning Triangle. Top Cover
19、 Identification Label. Side of the module INVISIBLE LASER RADIATIONAVOID EYE OR SKIN EXPOSURE TODIRECT OR SCATTERED RADIATIONCLASS 4 LASER PRODUCTCLASSIFIED IEC 60825-1:2007-03Laser classification Label. Top Cover Po 90% 180 250 s 9 Laser switching OFF time Pout=Pnom 100 10% 180 250 s 10 Pulse repet
20、ition rate RR 20 80 kHz 11 Pulse energy 0.5/1 mJ 12 Peak power instability Pout = Pnom 5 % 13 Red guide laser (optional) =660nm 0.3 0.5 1 mW Optical Output, Isolated and Non-isolated heads N Characteristic Test condition Symbol Min Typ Max Unit 14 Output fiber cable 67 mm metal shielded protection t
21、ubing 15 Beam Quality M2 1.5 2.0 16 Output fiber cable length) 0.5 mJ model 1 mJ model 5 3 m 17 Output beam diameter nonisolated head isolated head 1/e2 level 6.5 6 8.5 7.5 10.5 9 mm 18 Output beam ellipticity 10 20 % 19 Output beam offset 1 1.5 mm 20 Output beam misalignment 8 12 mrad 21 Output bea
22、m divergence adjustment minimum divergence Pulsed Ytterbium Fiber Laser YLP Series, 0.5mJ and 1 mJ pulse energy Users Guide Revision Date: 26.01.2009 Page 13 of 19 Electrical Characteristics N Characteristic Test condition Min Typ Max Unit 22 Control interface type B1 23 Laser module supply voltage
23、23 24 25 VDC 24 Maximum current consumption 10W model 20W model 30W model 50W model Usupply=24VDC 6 7 8 14 A General Characteristics N Characteristic Min Typ Max Unit 25 Operating temperature range 10W models 20W models, 50/100% emission time 30W models, 50/100% emission time 50W models, 50/100% emi
24、ssion time 0 +42 +42/36 +42/36 +40/35 C 26 Storage temperature -10 +60 C 27 Cooling method 3 fans 28 Warm-up Time: to start of operation to full stabilization 0.5 10 min 29 Humidity 10 95 % 30 Laser Module dimensions 215x95x286 mm 31 Weight 9 kg Standard non-isolated output head dimensions, 10W mode
25、ls Pulsed Ytterbium Fiber Laser YLP Series, 0.5mJ and 1 mJ pulse energy Users Guide Revision Date: 26.01.2009 Page 14 of 19 Standard isolated output head dimensions, 10/ 20/ 30W models Standard isolated output head dimensions, 50W model Pulsed Ytterbium Fiber Laser YLP Series, 0.5mJ and 1 mJ pulse e
26、nergy Users Guide Revision Date: 26.01.2009 Page 15 of 19 Laser module dimensions 1 25 pin Dsub control connector 2 power supply cable, 3 optical output 4 9 pin Dsub connector 2 1 3 4 Pulsed Ytterbium Fiber Laser YLP Series, 0.5mJ and 1 mJ pulse energy Users Guide Revision Date: 26.01.2009 Page 16 o
27、f 19 9 Preparation for Use and Operation For the detailed description of the control interface and operation steps refer to the actual revision of the product specification and the interface specification. 10 Certification IPG Laser GmbH certifies that this device has been thoroughly tested and insp
28、ected, and found to meet published specifications prior to shipping. NOTE: Upon receiving your device check the packaging and parts for any possible damage that may have occurred in transit. If damage is apparent please contact IPG Laser GmbH immediately. Pulsed Ytterbium Fiber Laser YLP Series, 0.5
29、mJ and 1 mJ pulse energy Users Guide Revision Date: 26.01.2009 Page 17 of 19 11 Warranty General Warranty All products are warranted by IPG against defects in materials and workmanship for the period of time as set forth on the applicable purchase order or in the specifications starting with the dat
30、e of shipment. IPG also warrants that this product will meet applicable specifications under normal use. IPG shall, at its option, repair or replace any product that proves, in the reasonable opinion of IPG, to be defective in materials or workmanship during the warranty period. All products repaire
31、d or replaced under warranty are only warranted for the remaining un-expired period of time in the original warranty for the particular defective product. IPG reserves the right to issue a credit note for any defective products that have proved defective through normal usage. Warranty Limitations Th
32、is warranty excludes products, parts or equipment which have been tampered with, opened, disassembled or modified by persons other than IPG personnel, misused, neglected, or damaged by accident, used in applications which exceed their specifications or ratings, used outside of environmental specific
33、ations for the product, used with buyer software or interfacing, improperly installed, maintained or otherwise abused or used other than in accordance with the information and precautions contained in this Users Manual. It is the customers responsibility to understand and follow operating instructio
34、ns in this Users Guide and specifications prior to operationfailure to do so may result in voiding this warranty. Accessories are not covered by this warranty. Buyer must claim under the warranty in writing no later than 31 days after the claimed defect is discovered. This warranty does not extend t
35、o any third party, including without limitation Buyers end-users or customers, and does not apply to any parts, equipment or other products not manufactured by IPG. Driver Software Any driver software provided now or in the future is provided solely under non-exclusive license from IPG Laser. By usi
36、ng the software, you agree to the terms herein. Trade secret laws, United States copyright laws and international treaty provisions protect the driver software. IPG Laser reserves all ownership rights. The owner of the device may only use the driver software only with the product(s) identified by IP
37、G Laser, and may make duplicate copies of the software solely for archival backup purposes. Any alterations of the driver software will void the warranty on the equipment provided by IPG Laser. The driver software is provided “as is” with no warranties whatsoever, whether express or implied, includi
38、ng the warranties of fitness for a particular purpose. IPG Laser does not warrant that the functions contained in the software will meet the users requirements or that the operation of the equipment or driver software will be uninterrupted or error free. Not all driver software has gone through IPG
39、Lasers normal quality control or product purposes, but is provided to users as an Pulsed Ytterbium Fiber Laser YLP Series, 0.5mJ and 1 mJ pulse energy Users Guide Revision Date: 26.01.2009 Page 18 of 19 accommodation to respond to their requests. End-user support is not implied or provided, and you
40、are assumed to have working knowledge of a particular development language. IPG Laser may make changes to the driver software and has no obligation to distribute newer versions. EXCEPT FOR THE LIMITED WARRANTIES EXPRESSLY SET FORTH ABOVE, IPG SPECIFICALLY DISCLAIMS ANY AND ALL OTHER WARRANTIES TO BU
41、YER, INCLUDING WITHOUT LIMITATION, ANY AND ALL IMPLIED WARRANTIES, SUCH AS FREEDOM FROM INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Exclusive Remedies THE REMEDIES PROVIDED HEREIN ARE BUYERS SOLE AND EXCLUSIVE REMEDIES. IN NO EVENT SHALL IPG BE LIABLE FOR DIRECT, INDIRECT, SP
42、ECIAL, INCIDENTAL, CONSEQUENTIAL, EXEMPLARY OR PUNITIVE DAMAGES (EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES) ARISING FROM OR RELATING TO THE PRODUCT (INCLUDING, LOSS OF PROFITS) WHETHER BASED ON CONTRACT, TORT OR ANY OTHER LEGAL THEORY. IPGS MAXIMUM LIABILITY WILL NOT EXCEED, IN THE AGGREGAT
43、E, THE TOTAL AMOUNT PAID FOR THE PRODUCT BY BUYER. Service and Repairs CAUTION: No operator serviceable parts inside. Refer all servicing to qualified IPG personnel. All requests for repair or replacement under this warranty must be made as soon as possible after the defect has been noticed and must
44、 be directed to IPG Laser or its representative in your area. Items authorized for return by us must be returned in a suitable container. Any damage noted upon receipt of the unit must be documented for appropriate claim against the carrier. IMPORTANT: Never send any product back to IPG without a Re
45、turn Merchandise Authorization (RMA). Please refer to the Sample RMA Clearance Form in this Users Manual for additional information. The customer will be charged for the cost of repairing the product if the product is not under warranty or if the repair is not covered under the warranty. Changes We
46、reserve the right to make changes in design or constructions of any of our products at any time without incurring any obligation to make changes or install the same on units previously purchased. Pulsed Ytterbium Fiber Laser YLP Series, 0.5mJ and 1 mJ pulse energy Users Guide Revision Date: 26.01.20
47、09 Page 19 of 19 12 Instructions for product returns 1. IPG Laser will only accept returns for which IPG Laser has issued an approved Return Material Authorization (RMA). You should send filled RMA request form to pulsed-lasers- account to discuss the return and get a RMA number. Please contact your
48、 local IPG office, in case the laser was bought not directly from IPG Laser. You must return defective products freight prepaid and insured to IPG Laser at the address shown herein. All products which have returned to IPG Laser but which are found to meet all previously applicable specifications for
49、 such products or which indicate damage to the fiber connectors not resulting from defect manufacturing, shall be subject to IPG Laser standard examination charge in effect at the time and these costs shall be charged to the Buyer. All products returned to IPG Laser which are not accompanied by an itemized statement of defects, shall be returned to the Buyer at the Buyers expense and IPG Laser shall not carry out any evaluation of such products. IPG Las
