1、Organoclay 有机粘土Clay 粘土reduction of peak of heat release rate 热释放速率降低峰值morphology 微观形态exfoliation n. 剥落；剥落物；表皮脱落intercalation n. 插入；插语症；设置（闰日、闰月等tactoid 类晶体团聚体nanodispersion 纳米分散ignition 着火，点火synergistic effects 协同效应nanoparticle 纳米颗粒incorporate 包含，合并thermoplastics 热塑性塑料thermosets 热固性材料textile 纺织，纺织品m
2、ontmorillonite, MMT 蒙脱土carbon nanotubes (CNT) 碳纳米管low flammability 低可燃性parameters 参数FRs 阻燃剂was melt-mixed with 与混溶in nitrogen flow to avoid oxidation 氮气保护以免氧化protocol 草案，方案at room temperature 在室温下at cryo temperature 在冷温thermal conductivity 热导系数modulation amplitude of +-0.5 C 调制幅度在正负 0.5hybrid 混合，杂种C
3、one calorimeter 锥形测量Aromatic 芳香族的Hardness 硬度bisphenol-A polycarbonate 双酚 A 聚碳酸酯halogen-free 无卤的substituent 取代基derivatives 衍生物deionized water 去离子水The aqueous solution of 的水溶液Dropwise 逐滴的Filtere 过滤Be washedwith aqueous solution of ethanol (75%, vol.) three times 用乙醇溶液洗涤三次Then the obtained product was
4、dried under vacuum at 90 C to a constant weight. 然后产品在真空干燥箱中 90干燥至恒重The synthetic route for 的合成路线The mixtures were compression molded into sheets of a 3 mm thickness and cut into standard testing bars. 这混合物被压缩成成 3 毫米厚度并切成标准测试的样条a twin-screw extruder operating at about 270一个双螺杆挤出机操作在大约 270the extruda
5、tes were comminuted into pelletspowder samples 粉末样品the absorption peaks at 在有吸收峰vibrational band 振动带under ventilated conditions 在通风条件下an insulating barrie 绝缘挡板solution blending 溶液参合microscale 微量charring process 碳化过程ultrasonically agitated for .超声化（时间）ultramicrotome 超临界切片机heat release capacity HRC 热释放能力cross-linking reaction 交联modifie 改性control sample 对照样品
